Chapter 1Basic Drawing Knowledge and Skills
1.1Drawing Tools and Usage
1.2Sheet, Line type, Font and Dimension
1.3General Steps of Architectural Drawing
1.4Freehand Drawing
Chapter 2Basic Concept of Projection
2.1Concept and Method of Projection
2.2Basic Properties of Orthographic Projection
2.3Three-plane Projection System and Three-plane Projection of Solids
Chapter 3Projection of Point, Line and Plane
3.1Projection of Points
3.2Projection of Straight Lines
3.3Projection of Planes
Chapter 4Relative Position of Straight Line and Plane, Plane and Plane
4.1Parallelism between Staright Line and Plane and Parallelism between Plane and Plane
4.2Intersection of Straight Line and Plane, and Intersection of Plane and Plane
4.3Perpendicularity to Line (Plane) and Plane
4.4Comprehensive Prolems of Spatial Geometric Elements
Chapter 5Projection of Planar Solid
5.1Three-plane Projection of Plane Solid
5.2Drawing Points on the Surfaces of Planar Solid
5.3The Intersection of Planes with Planar Solid
5.4The Intersection of Straight Line with a Planar Solid
5.5The Intersection of Two Planar Solids
Chapter 6Regular Curves, Curved Surface and Curved Solid
6.1Regular Curves and Curves Commonly Used in Engineering
6.2Curved Surfaces on a Basic Curved Stereo
6.3Basic Curved Surface Stereo
6.4Projection Analysis of Intersection Line Between Plane and Curved Surface or Curved
Surface
6.5Projection Analysis of The Intersection Point Between a Straight Line and a Curved
Surface
6.6Projection Analysis of the Intersection Line Between Plane Solid and Curved Solid
6.7Projection Analysis of the Intersection Line Between Curved Solid and Curved Solid
Chapter 7Axonometric Projection
7.1Basic Knowledge of Axonometric Projection
7.2Isometric Projection
7.3Oblique Axonometric Projection
7.4Axonometric Projection of Coordinate Circle
Chapter 8Combined Geometry
8.1Drawing of the Combined Geometry View
8.2Dimensions of the Combined Geometry View
8.3Reading of the Combined Geometry View
Chapter 9Drawing Method
9.1Profile and Cross Section
9.2Sectional Drawing in Axonometric Drawing
9.3Simplified Drawing
Chapter 10Building Construction Drawings
10.1Overview
10.2General Building Plan
10.3Floor Building Plan
10.4Building Elevation
10.5Building Profile
10.6Building Detail Drawing
Chapter 11Structural Construction Drawing
11.1Overview
11.2Construction Drawing of Hybrid Structure of Civil Building
11.3Plane Representation Method of Reinforced Concrete Structure Construction Drawing
Chapter 12Construction Drawings of Building Water Supply and Drainage
12.1Overview
12.2Floor plan
12.3System Drawing
12.4General Layout
Chapter 13Construction Drawings of Ancillary Facilities
13.1Road Route Engineering Drawing
13.2Bridge Engineering Drawing
13.3Culvert Engineering Drawing
13.4Tunnel Engineering Drawing
References
中国大学出版社协会 |
首页 |
宏观指导 |
出版社天地 |
图书代办站 |
教材图书信息 |
教材图书评论 |
在线订购 |
教材征订
